The DCM Plus is a door control module that can be used in both Honeywell MB systems and Honeywell ACS access control systems.
DCM Plus enables the installer to manage one or two doors remotely and securely via the MB-Secure/MB-Classic or the ACS, in conjunction with the IQ-MultiAccess access control software. The user-friendly design with plug-in screw terminals and switch/jumper settings makes installation, configuration and maintenance very easy.
Thanks to the licence concept, future functional expansions of the basic module can be upgraded via the MB controller without replacing the hardware if the requirements in existing properties change.
G123030
On MB-Secure / MB-Classic in IK3 mode.
- Arm/disarm and AC with the same reader
- Authorization control by ICP, optionally by IQMA/IQSC
- Different arm/disarm and AC criteria for in- and outside (MB-Secure)
- Multi-person ZK up to 9 persons for in- and outside
- Antipassback control (MB-Secure)
- BUS-2 interface to MB-Secure / MB-Classic
- Modulbus/RS-485 interface for up to four readers, alternatively two Wiegand readers
- Monitored MG input for opening contact
- Monitored MG input for glass breakage sensor, with reset
- Input for dead bolt switch contact
- Input for door release button
- Inputs for feedback of locking element 1/3
- Relay for locking device, reconfigurable to blocking element activation
- Relay for AC door strike
- Monitored DG input for ext. cover contact
- Input for presence monitoring
- Monitored DG input for armature contact
- Buzzer
- DIP switch for BUS-2 address
- Lid contact/off-wall contact
- Firmware update via BUS-2
On ACS-4 / ACS-8 in door module mode
- Access control for two doors or for one door with entry/exit reader
- Two interfaces for clock/data reader/keypad with LED rd+gr
- Three monitored DG free programmable
- Three digital inputs free programmable
- Two inputs for power supply monitoring
- Two relays free programmable
- One semiconductor output free programmable
- Buzzer
- DIP switch for BUS address
- Cover contact/off-wall contact
| Rated operating voltage |
12 V DC |
| Operating voltage range #4 |
9 V bis 15 V DC |
| Quiescent current #4 |
40 mA |
| Additional current consumption |
1 mA per MG, 20 mA per Relais |
| Output voltage |
12 V DC zu Leser, strombegrenzt auf 250 mA |
| Relay contact rating |
max. 2 A, 30 V AC/DC, 30 VA |
| Type of protection EN 60529 |
IP30 |
| Environmental class as per VdS |
II |
| Operating temperature range |
-10 °C bis +55 °C |
| Dimensions (W x H x D) |
163 x 152 x 40 mm |
Not compatible to 019038.10 Blocking element SLIM-LOCK
