Applications:
Vault doors, ATMs, night depositories, safe vaults, modular safes, detached safes, hatches, gates, footlockers.
G110004 (IDT), Class C
The seismic detectors of the SC100 series have been developed for recognition of vibrations generated by intrusions or tries of intrusions into stores for high-value goods.
The SC100 type is an universal seismic detector applicable for vaults, doors, ATMs, safes and other massive structures.
The SC105 type is a special version for mini ATMs or coin-operated machines normally positioned in a noisy environment. It provides the optimal relation of sensitivity and protection of false alarms for the detached objects.
The SC100 series provides different unique functions for reduction of the installation time, e. g.: integrated end of line resistors, embedded diagnostic tool, the smallest dimensions available on the market, universal applicability, even for ATMs.
- VdS-approval
- Detects attacks to:
Vault doors, ATMs, night depositories, safe vaults, modular safes, coin-operated machines, detached safes, hatches, gates, footlockers and offer objects of massive structure.
- Detects attacks via:
- A heavy kick or blow with a heavy hammer or by explosive material
- Repeated knocking caused by hammer and chisel
- Drilling, mechanical cutting, welding torches, hot cutting devices, jet cutting devices
- Water cooled diamond drills
- Hydraulic jacks (SC100 only)
- Sensor with small dimensions:
The smallest detector available on the market, fits even with restricted space.
- Universally applicable (ATM & safe):
By simple DIP-switch settings, the SC100 can be used for ATMs as well as for night depositories
- Drilling protection (standard):
Protects the interior electronnics from tamper
- Large temperature range:
Enables operation at extreme temperature conditions (-40 °C to + 70 °C).
- Input for remote controlled sensibility reduction:
Enables the reduction of the sensibility with use in ATMs to prevent false alarms
- Multi-compatible mounting plate fits to pre-assembled mounting apertures:
Fits to most of the pre-drilled mounting holes of other seismic detectors which saves time-consuming drilling/cutting of notches.
Even keeps maintenace easier. Last but not least the same mounting plate can be used for installation on concrete as well as for welding on steel.
- Integrated temperature alarm:
SC100 and SC105 will trigger an alarm if the temperature exceeds 85 °C. Furthermore, SC100 will trigger an alarm if the temperature raises more than 6 °C per minute.
This causes alarm messages on attacks with tools creating heat like e. g. a termic lance.
- Diagnosis LED:
Integrated tool for selection of the correct sensivity, doesn´t require time-consuming work with external devices.
- Adjustable sensitivity:
Four different sensitivity settings possible for adaption to the required range and environment conditions.
- Electronics for remote test or via test transmitter:
Input to run a remote functionality test with SC113 (internal test transmitter) or SC115 (external test transmitter).
| Supply voltage |
8 to 16 V DC, rated operating voltage 12V DC |
| Current consumption |
Typical 3 mA with 12 V DC |
| Settings possibillities |
4 steps via DIP-switch |
| Selection cash dispenser / safe |
Via DIP-switch |
| Delayed actuation |
N/A |
| Reduced Sensitivity Input for maintenace & service |
Active low (<1.5 V DC) |
| Recognition radius |
5 m |
| Semi-conductor relais (change over relais) |
30 V DC / 100 mA, type C |
| Open collector |
Active low during alarm |
| Alarm time period |
ca. 2.5 sec. |
| Pry open and open contact |
30 V DC / 100 mA |
| Alarm |
< 7 V DC (with low supply voltage) |
| Temperature alarm |
+85 °C ± 5 °C |
| Remote test |
Active low 1.5 V DC test duration < 0.5 sec. |
| Reduced Sensitivity Input |
Active low 1.5 V DC, test duration < 0.5 sec.; sensitivity reduction up to 12.5 % |
| Maximum humidity |
95 % relative humidity (non-condensing) |
| Operating temperature range |
-40 °C to + 70 °C |
| Storage temperature range |
-50 °C to + 70 °C |
| Environmental class as per VdS |
III |
| Type of protection EN 60529 |
IP43 |
| Frame and cover |
Metal pressure die casting |
| Weight |
0.228 kg |
| Colour |
light grey, similar to RAL7035 |
| Dimensions (H x W x D) |
80 x 60 x 21 mm |
Efficient alarm algorithm, highly sensitive for all known attacks, at the same time impossible against known triggers for false alarms using innovative filters and firmware.
