G108506 (IDT), Class B
G108508 (IDT), Class B, retrofitted for curtain optics
G108507 (IDT), Class B, retrofitted for route optics
The innovative radio system offers new opportunities of protecting human life and property values. Developed from the very start as a combined system, it is designed for securing privately owned homes, smaller and also larger commercial objects. In case of imminent danger, such as burglary, hold-up or even fires, it reliably signals an alarm via the alarm signalling devices of the connected intrusion detection control panel.
The radio system can be integrated into the following intrusion detection control panels: MB-Secure, MB-Secure PRO561-MB12, 561-MB24, 561-MB48, 561-MB100.
The RF BUS-2 wireless receiver (Item no. 015600.01) is used as a radio gateway between the radio technology and the BUS-2. This is why no special radio intrusion detection control panel is required.
During commissioning of the radio system, the radio users are read in and assigned permanently to the RF BUS-2 wireless receiver by means of a unique address.
The commissioning and also the programming of the radio system is done conveniently via a PC/laptop using the parameterisation software WINFEM Advanced and/or IQ PanelControl.
Passive infrared motion detector with surface mirror optics in wireless radio technology. The radio technology used by means of the dual-band transmission mode guarantees maximum transmission safety.
- Advanced radio transmission technology
- 2 radio bands: 433MHz / 868MHz
- A total of 24 radio channels distributed over 2 radio bands
- Wireless radio system on integrated BUS-2 basis
- Each radio user has a unique address
- Radio polling to all bidirectional radio users
- Permanent monitoring of the availability of the radio transmission path
- Intelligent external signal monitoring for detecting radio signals that do not belong to the system
- Function monitoring of all radio users assigned to the system
- Tamper monitoring of all radio users
- Radio revision mode for determining the installation range
- Connection to intrusion detection central units via BUS-2
- Simple commissioning by means of the installation mode of the WINFEM Advanced programming software respectively IQ PanelControl
- Surface mirror optics for monitoring 12 m x 12 m areas
- Can be retrofitted for route or curtain optics by replacing the mirror optics
- Detection sensitivity can be programmed from the control panel
- Range can be programmed from the control panel (mirror optics)
- LED display
- LED indications off mode possible
- Radio revision mode with selective LED display
- Temperature alarm with programmed alarm threshold
- Cover contact and tear-off protection
- Housing suitable for corner and wall mounting
- Monitoring of battery status
- Permanent radio monitoring by radio polling
| Operating voltage U_b |
1 battery pack, Item no. 015605 |
| Battery life expectancy |
typ. 2.5 years |
| Current consumption |
typ. 65 uA |
| Frequency band 1 |
433 MHz |
| Frequency band 2 |
868 MHz |
| Range |
programmable |
| Volumetric optics |
8 / 11 / 13 / 15 m |
| Long range optics |
29 / 35 / 42 / 50 m |
| Curtain optics (vertical) |
17 / 21 / 25 / 30 m |
| Sensitivity |
programmable normal / high |
| Installation position |
vertical, optics at the bottom |
| Type of protection EN 60529 |
IP30 |
| Environmental class as per VdS |
II |
| Operating temperature range |
-10 °C to +55 °C |
| Storage temperature without batteries |
-25 °C to +70 °C |
| Storage temperature with batteries |
25 °C +/-10 °C |
| Dimensions (W x H x D) |
64 x 158 x 48 mm |
| Colour |
traffic white, similar to RAL 9016 |
Batteries not included (1 required)
015605 Lithium battery for radio components, including connecting cable
033434 Viewguard PIR set of mirrors, curtain optics (3 per packaging unit)
033435 Viewguard PIR set of mirrors, route optics (3 per packaging unit)
033390.17 Adjusting hinge, horizontal W 20°, vertical +4° to -8°
033588.17 Ball joint set for wall and corner mounting
033391.17 Seal, (20 per packaging unit)
