VdS approval as technical detector (detector base + detector)
G109510 (802171 Fixed temperature detector IQ8Quad)
G109511 (802271 Rate-of-rise heat detector IQ8Quad)
G109512 (802371 Optical smoke detector IQ8Quad)
G109513 (802374 O2T multi-sensor IQ8Quad)
G109514, class B (802473 OTG multi-sensor (CO) IQ8Quad)
The innovative radio system offers new opportunities of protecting human life and property values. Developed from the very start as a combined system, it is designed for securing privately owned homes, smaller and also larger commercial objects. In case of imminent danger, such as burglary, hold-up or even fires, it reliably signals an alarm via the alarm signalling devices of the connected intrusion detection control panel.
The radio system can be integrated into the following intrusion detection control panels: MB-Secure, MB-Secure PRO561-MB12, 561-MB24, 561-MB48, 561-MB100.
The RF BUS-2 wireless receiver (Item no. 015600.01) is used as a radio gateway between the radio technology and the BUS-2. This is why no special radio intrusion detection control panel is required.
During commissioning of the radio system, the radio users are read in and assigned permanently to the RF BUS-2 wireless receiver by means of a unique address.
The commissioning and also the programming of the radio system is done conveniently via a PC/laptop using the parameterisation software WINFEM Advanced and/or IQ PanelControl.
The fire dectector base allows a fire detector of the IQ8Quard series to be operated on an intrusion detection panel. Connection to a hazard detection system is wireless via an RF-2 wireless receiver (015600.01).
Following combinations of automatic fire detector and smoke detector base are tested by VdS as technical detector.
Please order a suitable detector head for the detector base:
Item no. Designation
802171 Fixed temperature detector IQ8Quad
802271 Rate-of-rise detector IQ8Quad
802371 Optical smoke detector IQ8Quad
802374 O2T intelligent detector IQ8Quad
802473 OTG intelligent detector IQ8Quad
Detector testing devices are available upon request.
- Advanced radio transmission technology
- 2 radio bands: 433MHz / 868MHz
- A total of 24 radio channels distributed over 2 radio bands
- Wireless radio system on integrated BUS-2 basis
- Each radio user has a unique address
- Radio polling to all bidirectional radio users
- Permanent monitoring of the availability of the radio transmission path
- Intelligent external signal monitoring for detecting radio signals that do not belong to the system
- Function monitoring of all radio users assigned to the system
- Tamper monitoring of all radio users
- Radio revision mode for determining the installation range
- Connection to intrusion detection central units via BUS-2
- Simple commissioning by means of the installation mode of the WINFEM Advanced programming software respectively IQ PanelControl
- Detection and transmission of dirty or faulty smoke detectors
- Tamper detection (optional)
- VdS-compliant operation as technical detector
- Radio revision mode for determining the installation range
- Connection to intrusion detection control panels via RF BUS-2 wireless receiver
- Monitoring of battery status
- Permanent radio monitoring by radio polling
| Voltage supply |
4 batteries á 3.6 V |
| Battery life expectancy |
typ. 2.5 to 5 years depending on detector head |
| Frequency band 1 |
433 MHz |
| Frequency band 2 |
868 MHz |
| Type of protection EN 60529 |
IP42 (with detector head) |
| Environmental class as per VdS |
II |
| Operating temperature range |
-5 °C to +55 °C |
| Storage temperature without batteries |
-25 °C to +70 °C |
| Storage temperature with batteries |
25 °C +/-10 °C |
| Colour |
white, similar to RAL 9010 |
A fire detection system according to VDE 0833 part 2, DIN 14675 or EN 54 doesn`t result by the connection of the smoke detector base.
Batteries included.
015625 Battery pack, lithium, 4 x 3.6 V
