ACS PRO 2-door controller without power supply unit and housing in plastic carrier.
The ACS PRO Basic Access Controller manages up to 2 doors, but can be extended with licences (ACS-LIC2D, ACS-LIC4D). The licence can be purchased via the licensing portal and then transferred to the controller using the ACS-4 setup tool. Once the 2-door licence has been transferred in the 2-door basic model, the ACS PRO controller can support up to 8, 12 or 16 doors, depending on the number of 4-door licences.
After the first door upgrade (ACS-LIC2D), the activated extension buses can be connected to module bus readers, door modules, input/output modules and relay modules for e.g. lift control and door control.
ACS4C3-2 is suitable for installation in the MPA2ENCME housing.
It is possible to use ACS4C3-2 in systems without VdS requirements with ACS4ENCMV housing if visual and acoustic indicators are required.
From Q2-2024, ACS4C3-2 can also be installed in a 19-inch housing. (MPACSENCM2U)
as ACS3002E-MPS, without cabinet/enclosure, without power supply
| Operating voltage |
13,8 V |
| Current consumption without periphery |
200 mA |
| Additional current consumption |
1 mA per EOL resistor |
| Current consumption relay #2 |
15 mA per relay |
| Output current |
500 mA max per reader output |
| Total current |
3 A (all outputs together) |
| Battery capacity |
7 - 12Ah at 12 V |
| Charging current |
max. 512 mA |
IQ MultiAccess V25 SP1 or later required
For configuration the IQ ACS4 Setup Tool (V01.12) is required
ACS4C3-2 ACS PRO 2-Door Controller
Accessories for controller:
ACS-LIC2D ACS PRO 2-door licence for ACS PRO 2-door basic model
ACS-LIC4D ACS PRO 4-door licence from ACS PRO 4-door controller
MPA2RJ RJ45 to 8-way screw terminal converter
MPA2S5 S5 - Suppressor/Supervisory RJ45 Door Kit
018004.10 Rechargeable battery 12 V / 6.5 Ah
018011.10 Rechargeable battery 12 V / 12 Ah
Housing / mounting options (without VdS requirements):
MPA2ENCME Metal housing + NT for ACS PRO and MPA
ACS4ENCMV Housing + NT + indicators for ACS PRO/ACS-4
MPACSENCM2U 19-inch metal housing + power supply unit for ACS PRO controller (available from Q2-2024)
MPDIN10 Set with 10 DIN rail adapters
