The 809N is a self-activating panic lock with electro-mechanically coupling external handle for single-leaf doors. It fulfills the requirements for burglary-resistant doors, fire doors, emergency exit doors and panic doors in accordance with EN 179 and EN 1125. A mechanical sequence control system reliably prevents unwanted extension of the bolt when the door is open. The lock can be used universally for DL/DR with a universal double action latch, switchable control latch and panic side. The fail-locked or fail-unlocked operating mode can be switched on the lock. Integrated electronic control device for external triggering or connection to the ASSA ABLOY Hi-O bus System.
- Integrated motor coupling for controlling the outer handle
- Integrated electronic control device for external activation without additional control, additional functions via the external OneSystem IO module available as an alternative
- Hi-O bus technology for connection to the ASSA ABLOY Hi-O bus system
- Integrated monitoring functions via contactless sensors for status query via the external OneSystem IO module:
- Door status via striking plate contact
- Bolt position retracted and extended
- Monitoring of locking cylinder
- Handle follower monitoring outside and inside
- Handle coupling on or off
- Uniform connection technology: 2-wire bus technology
- 6 mm full face plate for added security
- Uniform lock case dimensions, compatible with 309N/319N (mechanical) and 509N/519N (motor lock)
- Suitable for DIN left/right use thanks to universal double action latch and reversible control latch
- Security fittings and oval roses can be screwed on through the lock
- Panic side changable for inwards or outwards opening
- Solid, surface-hardened deadbolts with 20 mm throw, transverse shear stress 20,000 N
- One variant for Euro profile cylinder and Swiss round profile cylinder
| Rated operating voltage |
12 - 24 V DC +/- 15% |
| Current consumption |
50 mA (idle position barred) |
| Current consumption active #2 |
80 mA (<500mS) connector active |
| Sliding bolt counterforce |
6000 N (according to EN 12209) |
| Material |
Steel chromed (face plate) |
| Dead bolt throw |
20 mm |
| Follower |
9 mm |
| Backset |
35 mm |
| Dimensions |
328 x 20 x backset +15,5 mm (LxWxH) |
019245 Cable
019247 I/O-Box
019246 Locking plate
094005 Recommended psu for I/O-Box
