Basic fitting, reading electronics and handle outside, mechanical handle inside, for doors with a thickness of 40-50 mm, mifare
The definition of the outside and inside length is done via the configurator. Some options require surcharge which will be identified accordingly by the configurator.
Aperio® is a new global ASSA ABLOY technology that enables mechanical locks to be wirelessly linked to an new or existing access control system without any need to modify the door. The heart of Aperio® is a short distance wireless communication protocol designed to link an online electronic access control system with an Aperio® enabled electronic cylinder or door fitting.
Product description:
Communication from hub to the Online Access Control System - access decision in the EAC system
Can be used with all European (DIN) mortise locks - in wooden, steel and tubular-frame doors
Main electronics (RFID + radio) outside - security-relevant electronics inside
Outside handle rotates freely - inside handle always engaged
Possibility to store up to 10 emergency cards (only used in case of disconnection from the hub)
- AES 128 bit encryption
- Reading technology: MIFARE ™ Classic or MIFARE ™ DESFire ™ EV1 or LEGIC Advant or LEGIC Prime
- Micro-USB firmware download
- Three authentication levels (pin only, card only, pin & card combined)
- PIN code 4- to 8-digit with AP-0100
- Basic = interior and exterior doors up to category 2
- Pusher in L-shape and U-shape
- Door thickness between 40 and 100 mm, in increments of 10 mm
- LED for status visualisation
| Battery type |
1 x Lithium CR123A |
| Battery durability |
> 40,000 cycles (for max. 3 years) |
| Radio frequency |
IEEE 802.15.4 (2.4 GHz) |
| Radio transmission range |
Typical range of 5 m or 25 m depending on the hub type and building environments |
| Type of protection |
IP 52 |
| Operating temperature range |
-20° to +55°C |
| Control - LED's |
LED (red/green/orange)) |
| Reading distance |
< 4 cm |
| Interfaces |
Micro-USB-Firmware download |
| Surface |
Stainless steel brushed (ST) |
| Distance |
Distance 72 mm, 92 mm; Spindle 8 mm, 9 mm, 10 mm |
| Backset |
> 40 mm |
| Relative Humidity |
< 85% (condensation-free) |
Please note that harsh environments can impair the functionality of the products. The components must be protected against water penetration
Battery included (Lithium CR123A) and installation instructions, screws, drilling template and tool (for inserting cables)
