G115068, Class C
EN 50131-1 Grade 3
The IB2 16 I/O Expander is intended to expand a MB-Secure series intruder panel with additional detector group inputs and outputs.
The connection to the MB-Secure panel is established via BUS-2 or the IB2-Bus, whilst the module can be operated in in the panel housing as well as in a separate housing.
For connection of hardwired detectors there are 16 deletable inputs in double-balanced technology available. By this up to 3 contacts of a detector can be connected in series and supervised by various resistor values. With this each input can handle all signals of a detector (alarm, fault, tamper and line break) in an efficient and economical way.
For operation of latching sensors e.g. passive glassbreak sensors each input provides a reset function.
Also the detector group inputs can be programmed and operated as active-low outputs.
Additional to these the module provides 16 free programmable active high outputs with 12 V 50 mA, which can be also used for operation of the relays like on the 013941.
- 1 IB2-BUS or BUS-2 line to MB-Secure
- Maximum distance with IB2-BUS up to 2000m, with BUS-2 up to 1000m
- 16 hardwired detector group inputs in double balanced technology, all resetable
- Detector group inputs alternatively configurable as active low outputs, each separately
- 16 outputs active high 12 V DC
- 1 input for tamper contact
- Auxiliary power supply input 12V
- 3 LEDs to display system status
| Operating voltage U_b |
12 V DC |
| Operating voltage range #4 |
10 V ... 15 V DC |
| Quiescent current #4 |
20 mA for BUS-2 operation, 55 mA for IB2 operation |
| Current consumption per terminated input |
0,6 mA |
| Environmental class as per VdS |
II |
| Operating temperature range |
-10 °C ... +45 °C |
| Ambient temperature range |
-25 °C ... +70 °C |
| Dimensions PCB (W x H x D) |
158 x 112 mm |
IB2 16 I/O Expander, mounting material.
