G114021, Class C
EN 50131-3, Grade 3, Class II
SES-EMA-RL-T2:2010-08
The Sounder/Flasher with 2 Inputs BUS-2 is intended for extension of a MB-Secure- or MB12/24/48/100/256 plus series intruder panel with control and power supply over BUS-2.
When operated at the MB/MB-Secure panel a sounder and a flasher with individual setting of impulse, brightness, and loudness and two free programmable detector group inputs are available.
Also there is a compatibility mode provided for operation at MB12/24/48/100/256 plus panels as 5-output-module BUS-2. In this case five different operation modes for the sounder/flasher can be programmed, the inputs are not supported in compatibility mode.
- Operation at BUS-2
- Flasher with high-power LEDs
- Piezo sounder
- Impulse, brightness, and loudness individually programmable (only MB-Secure)
- 2 detector group inputs free programmable (only MB-Secure)
- Detection range 4k - 14k and 20% / 30% / 40%
- Cover tamper and pry-off-tamper detection
- Firmware update via BUS-2 supported
- For MB12/24/48/100/256 plus this modul can be used on BUS-2 in a compatibility mode as a 5 Output Module (only sounder/flasher)
| Rated operating voltage |
12 V DC |
| Current consumption at 12 V DC |
<4mA (Detector groups open, acoustical/optical signalling device off) |
| Additional current consumption |
0.4 mA per terminated detector group; 50 mA acoustical signalling device; 25 mA optical signalling device |
| Detector zone inputs |
3.3 V DC, stabilized, short-circuit protected; monitoring range 12k1 ±40% |
| Loudness level of the signal device |
up to approx. 100 dB(A) (adjustable) |
| Type of protection EN 60529 |
IP30 |
| Environmental class as per VdS |
II |
| Operating temperature range |
-5 °C to +45 °C |
| Storage temperature range |
-15 °C to +70 °C |
| Dimensions (W x H x D) |
110 x 103 x 53 mm |
| Colour |
traffic white (similar to RAL 9016) |
